Description
Additional Information
- Compatibility with LED profiles
- For LED profiles please use a variant that has a least 12mm room inside of the profile without ridges!
- 14mm profiles or larger recommended!
- COB LED strip has components with electrical connections near the edges, normal profiles can conflict with this
- COB LED strip does not bend, you need to be able to put it inside of the profile without bending
- For LED profiles please use a variant that has a least 12mm room inside of the profile without ridges!
- Usage guidelines
- COB LED strips are more sensitive then normal LED strips, please keep this in mind
- Do not bend around sharp corners!
- Make sure no metal touches the exposed electrical contacts!
- This is a high powered strip, please treat that with respect
- Do not run the LED strip on the roll it’s supplied on
- Do not run above 60w without a cooling profile applied
- Doing so can substantially shorten the lifespan of the strip!
- Please do not run 100% RGB white, use dedicated white
- Cuttable only on copper pads
- Please closely match the line provided, cutting somewhere else can break traces
- Cutting waterproof strip compromises factory waterproofing and needs to be resealed by customer
- COB LED strips are more sensitive then normal LED strips, please keep this in mind
- Power guidelines
- 5m is good with a single injection
- 10m is ok with a single injection (power limit to 5A)
- front + end injection is required to reach full output potential
- Warranty guidelines
- ! I do not make a huge margin on these strips, I need to sell 8+ to make up a single replacement ! Please treat them with respect
- 6 Months warranty time (from purchase)
- Diagnosis and support of problems through Discord server
- Replacement if strip arrives DOA
- Can be asked to return strip to fix problem
- If failure over time, depends on situation
- Sometimes part of strip needs to be replaced (section gone bad) manually (needs soldering)
Reviews
There are no reviews yet.